Skip to main content

How to get air out of the pool pump is the major concern for the majority of the pool owners. Having a pool in the comfort of your home is no less than a blessing, but what if you are all ready to dive in, only to find out that you have air in the pool pump—an airlock!

Swimming in the pool, especially in the summer, is a pleasant activity, but with a dirty and cloudy pool, one cannot enjoy it. To keep your pool protected from dust and other elements it is necessary to keep the air out of the pool pump system.

But, how to get air out of the pool pump?

If you are in the same boat, no need to worry because you have landed on the right page. We all need fresh air, but it is the opposite for the pool pump. It is meant to push through water, and not air. And if it is the opposite the circulation system can go wrong. If you notice air bubbles coming out of your return jets in your pool; it is the time to take some serious action. In this guide we will learn about how to get air out of a pool pump.

Why Is Air in Your Pool Pump Is a Problem?

poop pumpSometimes air in your pool pump can cause problems in the functioning of the pool circulation system, which reduces the efficiency of the whole system. Here are some reasons why pool air pump is a problem:

  1. Reduced Pump Efficiency:

Air entering the pool pump systems displaces water which decreases the capability of the pump to circulate the water. That reduce water flow that affect how good the pump work

  1. Cavitation:

Well, when air is inhaled by the wind turbine pump, will it create small explosions? Right? Cavitation can wreck the pump impeller and other stuff, making them get worn out faster, and this could mean really expensive repairs.

  1. Loss of Prime:

When air is present in the pump system, it may cause a loss of prime which means that the pump can no longer suck water from the pool effectively. This may lead to the pump to run dry, harming the pump and possibly devastating the motor.

  1. Inadequate Filtration:

If air bubbles go through the filter, it can lessen the filtration’s work. It is important to filter the water before using it for drinking, cooking or even bathing. This process removes dirt, bacteria, chemicals and other unwanted substances. Without filtration, water can be harmful to health. It can poor the quality of air if it disrupts it during the filtration process.

  1. Air Binding:

In some cases, air present in the water pump system can lead to air-binding problems where the pump is unable to move the water efficiently. I think this might cause the pump to not work correctly, become too hot and eventually break down.

  1. Noisy Operation:

Having air in the pump system can make the operation loud. It’s important to listen out for sounds that are not normally heard like gurgling, hissing, or vibrating, as this means there’s air in the system.

  1. Potential Leaks:

Unwanted air will be present in the pump system . This can lower productivity and efficiency. Indeed, discovering water leaks and dealing with them is highly critical for conservation of our water resources and other system problems.

  1. Strain on Equipment:

The pool circulation shaft is meant to run with water not air. The presence of air can damage the equipment because it will create more pressure.

One must be able to make certain checks. Making sure that pool has enough water, sealing of pump lid and gasket. Checking the system for any leaks will help you resolve this problem. For running the pool circulation system appropriately, one must keep checking and fixing air quality issues. This can be achieved through routine maintenance only. How to get air from your pool pump? It is not a difficult task but in case of any problem, you can always reach out to a professional pool service technician.

How to get Air out of a Pool Pump?

air pool pumpGetting air out of a pool pump is crucial for maintaining the efficiency and proper functioning of the pool circulation system. Here’s a step-by-step guide on how to remove air from your pool pump:

  1. Check Water Level:

Ensure that the water level in your pool is at the appropriate level. Low water levels can contribute to the introduction of air into the pump system.

  1. Inspect Equipment for Leaks:

Check all the components of the pump system, including valves, fittings, and pipes, for any signs of leaks. Even small leaks on the suction side can introduce air into the system.

  1. Close Air Release Valves:

If your system has air release valves, make sure they are closed tightly. These valves are designed to let out air but need to be closed during regular operation.

  1. Check Pump Lid Seal:

Inspect the pump lid and its sealing gasket for any signs of wear, damage, or debris. Clean the gasket and ensure that the lid is properly sealed when closed.

  1. Bleed Air from Filter:

If your system has a pool filter, there may be an air relief valve on the filter. Open this valve to release any trapped air. Monitor the valve until water starts flowing consistently without air bubbles.

  1. Vent Air from Pump:

Some pool pumps have a manual air release valve on the pump housing. Open this valve briefly to release any trapped air. Ensure that you close it securely afterward.

  1. Prime the Pump:

If you’ve lost prime in your pump, you may need to reprime it. How to prime a pool pump– Turn off the pump, close the skimmer and main drain valves, and fill the pump basket with water. Restart the pump, and open the skimmer and main drain valves once the pump is running.

  1. Use a Hose:

In some cases, you can use a hose to force water into the pump. Turn off the pump, disconnect the hose from the skimmer or main drain, fill it with water, and reconnect it. This can help remove air pockets in the suction line.

  1. Consult a Professional:

If you’ve gone through these steps and still have issues with air in your pool pump, or if you notice persistent leaks, it’s advisable to consult with a professional pool service technician. They can perform a thorough inspection and address any underlying issues.

  1. Regular Maintenance:

To prevent future occurrences, practice regular maintenance. Check for leaks, ensure proper water levels, and inspect seals and gaskets periodically. By following these steps, you can effectively remove air from your pool pump and maintain a smooth and efficient circulation system. Regular inspection and maintenance are key to preventing the recurrence of air-related issues.


How to get air out of the pool pump is not really the cause of the alarm. But it is worth worrying if it is affecting the overall cleanliness and hygiene of your pool. The air in your freeform swimming pools can impact your swimming experience. Therefore, it is better to be safe than sorry–be a responsible pool owner and check your pool pump for air to prevent any dirt buildup and to have clean water every time you swim.

Leave a Reply